Specifiers Altair Louvre Window Checklist

A full specification checklist is provided below to assist you when designing with Altair® Louvre Windows.

Breezway Window System Checklist

 

Required Information

  • Design Pressure
  • Manual or Automated
  • Frame Size
  • Gallery Clip Size
  • Height & Width
  • Number of Bays
  • Frame Colour
  • Clip & Handle Colour
  • Gallery Clip Size
  • Handle Type
  • Blade Type
Optional Information

  • Left or Right Handed
  • Offset Mullions
  • Couplers & Cover Plates

Altair Louvres for Other Frames Checklist

 

Required Information

  • Gallery Clip Size
  • Gallery Height
  • Gallery Colours
  • Clips & Handle Colour
  • Blade Length and Type
  • Weatherstrip for Head and Sill
Optional Information

  • Left or Right Handed
  • Handle Type
  • Variable Handle Position/Additional Handles

Specification

A tight specification will help to make sure that what you specify ends up in your building thereby achieving your design objectives.

The louvre windows shall be Breezway Altair Louvre Windows

Unique features:

  • Drainage channels for superior water performance.
  • ‘Living Hinge’ design that pulls the clips tightly against the channel when closed for superior water performance and air infiltration.
  • Low profile keylock with lock barrel housed inside the louvre channel.
  • Passed testing to 40,000 open/close cycles for long operational life.
  • Passed testing to 15,000 lock/unlock cycles for long operational life.
  • Altair Louvres have passed AS2047 testing at 3,000mm high.

The louvre windows shall be Breezway Altair Powerlouvre Windows

Unique features:

  • Drainage channels for superior water performance.
  • ‘Living Hinge’ design that pulls the clips tightly against the channel when closed for superior water performance and air infiltration.
  • Motors are concealed within the head of the window frame.
  • Motors are easily accessible for maintenance.
  • Each low voltage motor only requires 0.25 amps to reduce transformer and wiring requirements.
  • Motors can be powered by appropriately specified transformers from any supplier.
  • Available as either a fully assembled window system or as a component system for installation into window fabricator’s framing systems.